Beckyla80 1 Posted December 29, 2019 Share Posted December 29, 2019 Hi, I am very new to using this so apologies if this is a daft question but I am really struggling to add a new row to a table. I have tried to follow the FAQs advice but when I hover over the table I am not getting any grey dots or any arrows? Any help would be appreciated. Link to comment
Level 5* gazumped 12,050 Posted December 30, 2019 Level 5* Share Posted December 30, 2019 Hi. Try hitting <tab> (on your keyboard) when your cursor is in the bottom-right cell. How to create and customize tables 1 Link to comment
Level 5* jefito 5,598 Posted December 30, 2019 Level 5* Share Posted December 30, 2019 Or right-click in a cell on the bottom row of your table, and select "Insert row below" Link to comment
Level 5* CalS 5,307 Posted December 31, 2019 Level 5* Share Posted December 31, 2019 Or click on the little dot on the bottom left of the table, which should appear when you click in the table. 1 Link to comment
Level 5* jefito 5,598 Posted December 31, 2019 Level 5* Share Posted December 31, 2019 The 3 Stooges ride again... 1 Link to comment
Level 5* CalS 5,307 Posted December 31, 2019 Level 5* Share Posted December 31, 2019 Do I want to know who's who??? Link to comment
Level 5* jefito 5,598 Posted December 31, 2019 Level 5* Share Posted December 31, 2019 7 minutes ago, CalS said: Do I want to know who's who??? Take your pick. There were 6 actors who played stooges over their history (though Moe and Larry were always present; the third stooge role was played by four different actors). Gaz, being British, may not be up on the 3 Stooges phenomenon, so we can probably pawn off our least favorite on him... I would take Curly, as I can do a fair imitation finger-snapping "gna-ah-ah-ah" bit. My hair is a lot longer, though... Link to comment
Level 5* CalS 5,307 Posted December 31, 2019 Level 5* Share Posted December 31, 2019 Well, I'm probably more a Moe than a Larry, stir-stir-stir. And Larry being the every man may be a good fit for the kind Gaz., Good to know you are the crazy one. Link to comment
Level 5* gazumped 12,050 Posted January 1, 2020 Level 5* Share Posted January 1, 2020 Who you callin' crazy? 1 1 Link to comment
Level 5 Dave-in-Decatur 4,004 Posted January 1, 2020 Level 5 Share Posted January 1, 2020 Welcome to the new year, and a new avatar, Gaz! May you wear it in, um, good health, with no lumber slamming your head and no fingers poking your eyes. Boy the subtleties of classic comedy. @Beckyla80, I apologize on behalf of the stooges here for the drifting of your thread. I don't know how they keep getting in. I hope some of the suggestions offered earlier on were helpful! 1 Link to comment
Level 5* jefito 5,598 Posted January 1, 2020 Level 5* Share Posted January 1, 2020 1 hour ago, gazumped said: Who you callin' crazy? Oh, a woise guy... woob-woob-woob-woob... Link to comment
Level 5* s2sailor 2,422 Posted January 1, 2020 Level 5* Share Posted January 1, 2020 21 hours ago, jefito said: the third stooge role was played by four different actors What!?! Only two count ... the other two should never be acknowledged. They are a pock on the Stooge legacy. What was this thread about anyway?? Link to comment
Level 5* CalS 5,307 Posted January 1, 2020 Level 5* Share Posted January 1, 2020 What's the big idea here?! 1 Link to comment
huskerdont 0 Posted January 15, 2020 Share Posted January 15, 2020 I am having the same issue. I've tried dozens of times, but I don't have little grey dots anywhere near my table, even when I hover over or click where they are supposed to be. Image is attached. I also don't get an option to add a new row/column when I right click. I tried hitting tab but it just inserts a tab stop into the cell. So frustrating. Link to comment
huskerdont 0 Posted January 15, 2020 Share Posted January 15, 2020 On 12/29/2019 at 1:34 PM, Beckyla80 said: Hi, I am very new to using this so apologies if this is a daft question but I am really struggling to add a new row to a table. I have tried to follow the FAQs advice but when I hover over the table I am not getting any grey dots or any arrows? Any help would be appreciated. Did you figure this out? I used to use Evernote a lot a few years ago and had no issues. Now, I signed up again and am suddenly having the same problem you are. Link to comment
Level 5 Dave-in-Decatur 4,004 Posted January 15, 2020 Level 5 Share Posted January 15, 2020 Hi, @huskerdont (great screen name!), and welcome to the forums. Looks like you're using the older version of the Evernote Web browser interface. This the forum for the Windows desktop program, so it's not surprising that you're seeing something different. If you don't have the Windows program and want to get the latest version, go to https://evernote.com/download and follow the instructions. If you'd rather stick with the browser interface, click your initial at bottom left to get the Account menu and select "Switch to the new Evernote Web." Once that's in view, check for a button at bottom right. If it's a black button that says "Beta Editor," you're in business. If it's an orange button that says "Classic Editor," click on it to switch to the Beta. Table editing should work better then, including using Tab in the last cell to create a new row. Link to comment
Beckyla80 1 Posted March 3, 2020 Author Share Posted March 3, 2020 Thanks @Dave-in-Decatur Really helpful! 1 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now