Jump to content
We apologize for the inconvenience, but chat support is currently unavailable. Please feel free to submit an email ticket or reach out at discussion.evernote.com. Thank you for understanding. ×


Level 2
  • Content Count

  • Joined

  • Last visited

Everything posted by rdenzel

  1. It's not really about layout, but about easily reusing the data that you put into EN. I originally joined because an ad or promo showed someone writing a draft of a blog post, then pasting it in to the blog post editor (wordpress, probably). You can do that, but if you write the draft in EN you probably have a blank line between each paragraph, just so you can see different paragraphs in EN. After pasting you have to manually remove all those blank lines. Also, the data pasted in doesn't have a paragraph break, but a line break, so you have either paste in as text only and lose formatting or do more work to change the line breaks to paragraph breaks so the blog post is formatted correctly. Compare this to text written in this forum, where hitting enter at the end of a line produces a paragraph break (with spacing between paragraphs) that can be copy/pasted to Wordpress, Word, etc. just fine. I agree this might not be the best way to submit a feature request, so I hope everyone who wants this feature submits one through the official channels.
  2. I have the latest version of EN, and whenever I open or even just select certain notes that have been created by the Chrome clipper, the CPU, Memory, and Power Usage immediately jumps. It never comes back down until I click into another note and close that note. Either one will leave it running down my battery and slowing down my computer with the uber-high cpu usage. I've copied the content of the note to a fresh note, and that note also exhibits the behavior. It doesn't happen with ALL clipped notes, but with most of them. I've attached the portion of the log that shows the errors. It shows 'failed to open' and 'unable to open' even though the notes DO open and look fine, although CPU immediately shoots up and power usage (in Task Manager) goes to Very High in just 2-5 seconds. Evernote_6.19.2.8555_20190725 edited.log
  3. I guess I'll have to figure out the official support and submit the issues. My laptop just went 'red hot' because I failed to click into a text only note. It's not EVERY clipped page, but lots of them do it, and it's almost instantaneous. The task manager power use goes from low to very high over about 15 seconds!
  4. Thanks for trying it. I'll keep track and see if I see a pattern that can be replicated. I'm on the same build as you, btw.
  5. I'm not sure what changed, when. The problem came back at least a week or two ago, but I couldn't figure out what the pattern was, and I didn't have time to look into it until yesterday. It's possible (seeing the pattern that's causing it for me) that my issue never truly went away, but that the notes I was selecting weren't ones to cause the issue.
  6. It's back. Every few days I find my fan running full blast. I check Task Manager and find Evernote Subprocess taking up 19-29% of my cpu. This morning I found that when I changed from my last selected note (created using Clip to Evernote) to a text only note I'd manually created that the CPU immediately drops, although 'power usage' remains high to very high for a little while. I've tested this with a variety of notes, both text only and Clip. Not all Clip notes do this, but several of them do. It doesn't matter if they are open in a separate window or just clicked on in the side preview, the cpu immediately goes way up. If I don't click away, it will stay high for hours. If you want to try to recreate this, the link below is the web page that I saved via the Clip to Evernote Chrome extension. https://coschedule.com/blog/best-time-to-send-email/ I have to keep reminding myself to click to a text-only note when I'm done for now.
  7. Mine just did it with the only note open being text only. There was some bold, but otherwise plain text pasted in from a plain text document. I ended up having to kill the process that was eating up ~30% cpu using Task Manager before the fan would slow.
  8. Great. I wanted to be sure I hadn't installed the wrong version somehow.
  9. BTW, just clicking the X to quit doesn't kill the subprocess. You have to File>Exit. Even then, the fan doesn't seem to return to normal until you launch EN again. ...unless that's just a coincidence, but I waited 5 minutes for the fan to stop after closing EN and force ending the process via task manager. The fan kept roaring, but as soon as I launched EN again, it immediately slowed, then stopped. The EN Subprocess (32 bit) is nowhere to be seen yet since the relaunch.
  10. Same! Same laptop even. I keep having to kill the EN subprocess to make it stop. Strangely, it says (32 bit) when this is a 64 bit system. If I kill the process and relaunch, it's fine for a while, but eventually, my laptop gets hot and the fan goes non-stop and full blast.
  11. Thanks I guess for now I'll just delete and start over with something inserted via "add remark." Thanks for the suggestion.
  12. Thanks, but most websites have some sort of header, and the block code box appears right in the middle of it, not before. If I could find a way to insert something BEFORE the first thing in the note, that would probably do it, but you're already positioned in the web page's html
  13. I'd like to be able to add a simple comment or note to myself at the top of web pages I've added to EN via the Web Clipper. If I remember when clipping, I can add a comment, which appears before the clip of the web page, but I can't find an easy way for when I forget. I usually delete the note and do it again, but I'm hoping there's a better way. If this was a webpage editor I'd click the <> button which would show me the html/txt version, allowing me to insert some lines of plain text. Is there a way to do something like this with an EN Note? Thanks! Roland
  14. The paragraphs are there, EN just doesn't display them with an space between them. If I copy/paste into Word I get the paragraphs I want UNLESS I've added a blank line between them in EN. In my mind, it stopped being a mere text editor when it got indents, bullets, bold, italic, etc.
  15. I use a word processing app every day. The issue for ME is that I build my notes in Evernote over time, but when I want to take it to a word processing app, the paste into Word (or Wordpress) now has a blank line between every paragraph. I understand that I put the blank line there, but I did so because Evernote does not give me the option to display a larger line space between paragraphs, making it hard to read unless I hit 'enter' twice. For me, it's simply a display issue in Evernote. I don't need a word processor, but I want it not to hamper things once I transfer to an actual word processor. Even this very forum puts about a line space and a half between paragraphs. I don't have to hit enter twice to see when paragraphs change.
  16. Evernote remembers now! It seems trivial, but it's so much more pleasant to use now that windows maximized when you closed them, open still maximized. Thanks!
  17. Agreed! Often when a note gets really long and detailed it's hard to follow without a manual line break between paragraphs. When I later decide to paste it into a wordpress or a word processor, I have to go and delete all the extra lines.
  18. I've been trying to use EN to compose the text of blog posts because it's easy to access anywhere and pickup right where I left off. However, when I finally paste it into my wordpress blog, I end up with a blank line between each paragraph. I understand that I am creating the blank line in EN, but there's really no way to see a paragraph change in EN without a blank line. It would be very helpful to have an option in EN to display a larger line spacing after each paragraph, to avoid the issue of manual line double spacing. Actually, here in the forum it's awesome. You can hit enter and see that you're in a new paragraph because it's spaced about 1.5 lines after each paragraph break/enter.
  19. This happens to me quite often, although sometimes undo DOES work. I haven't found a pattern yet. It SEEMS to happen when I paste something in, but I'm not sure that's the only time yet. Windows 10 EN (276742) Public
  20. If this is on by default, then that should be changed. With so many features in Tools on the desktop versions, why hide this in online preferences? Why would anyone go there? They would think all the preferences are in Tools on the Desktop UI. I'm sure some people would love auto tags, but not auto filing. I would, but I want to be able to find all emailed in notes in one place so I can sort them later. 1. Change the default preference setting if it now defaults to 'checked.' 2. Add the online preferences to the Tools section of the desktop version. At the very least, put a note in there with a link to the online preferences so people know there are other settings not showing up. 3. Split the feature into two features; auto tag? auto file? Thank you for listening! Roland
  21. I have the same problem with the Blackberry 10 client. It seems there's no way to create a link that's clickable on the desktop from my Blackberry 10 device. I can, like you guys can on Android, close the note and open the note again on my blackberry and then click the link, but that same link is not clickable on the desktop version of Evernote after it syncs. In order to click on a link on the desktop, I have to open the note and add a space or carriage return after the url string, turning on the link before closing it and reopening it. It really seems like the Evernote client or Evernote server processes should detect the link and make it clickable, and not rely on the various clients, which all appear to do things differently.
  • Create New...