Level 5* JMichaelTX 4,117 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 RE: Welcome to the new Evernote Discussion Forums Geoff, my immediate impression is: Quote And @JMichael—you requested this, and it’s now available: you can select a block of text and hover over to quote it. Try it out, it's pretty cool. Thank you so much. it is very cool, and very useful. This will allow users to easily and quickly select just the part of a post they want to respond to. Yea! The other biggie for me, is how easy the pages are to read. They are both easy to read, and look very nice. Another, big, big, THANK YOU!. (Note: reposted this in the General Discussions forum after I discovered that I accidently posted it in the Announcements forum.) Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 @gbarry: Noticed a few glitches: All existing threads seem to have double spacing between paragraphs. When posting the initial topic, the full formatting toolbar is not shown. Don't see the "Preview" button now Link to comment
gbarry 2,658 Posted December 17, 2015 Share Posted December 17, 2015 7 minutes ago, JMichael said: All existing threads seem to have double spacing between paragraphs. When posting the initial topic, the full formatting toolbar is not shown. Don't see the "Preview" button now Adding this to the list to review tomorrow. Will look into all of them. And thanks for the kind words! We worked pretty dang hard on this. Still lots to do, but it's good to have it out the door. Link to comment
Level 5* EdH 1,670 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 20 minutes ago, gbarry said: Adding this to the list to review tomorrow. Will look into all of them. And thanks for the kind words! We worked pretty dang hard on this. Still lots to do, but it's good to have it out the door. Overall looks good. It seems the issue where quoting a quote that was a quote that was a quote has been eliminated. The only problem is sometimes that loses some context. I always jumped into the text mode to edit it down to the relevant quotes, and don't see a way to do that in the new forum, but judging by the massive level of nested quotes I've seen, not many bothered to do that, or knew it was possible. Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 11 minutes ago, EdH said: It seems the issue where quoting a quote that was a quote that was a quote has been eliminated. @gbarry: Some more glitches: Just now, when I selected just the above portion of EdH's post, and clicked on "Quote This", it quoted his entire post. The quote blocks for existing threads seem to have disappeared. The quote text is there, but no indication that is is a quote. See https://discussion.evernote.com/topic/90900-evernote-for-mac-63-released/?do=findComment&comment=388747 as an example. Although I generally avoid it, sometime you do need to quote the entire multi-quote block of a previous post. This doesn't seem to work now when you click on the "Quote" button at the bottom of each post. Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 @gbarry: Some more: It is not showing all of of Private Messages https://discussion.evernote.com/messenger/ It shows I have 48 msg, but only 5 of them appear in the actual list. The Indent and Outdent buttons are missing from the formatting toolbar. The Insert Image button is missing The Reveal BBC Codes button is missing The Font Family/Name dropdown is missing The Insert Code Block button is missing I'm trying to post a screenshot, but can't find any button or tool to do that. After I submit, and then edit, then the "INSERT OTHER MEDIA" button shows up. Link to comment
g2ews 0 Posted December 17, 2015 Share Posted December 17, 2015 Hmm, interesting, I don't seem to have any of my pm's. Have they been automatically deleted? Regards Chris Link to comment
Level 5* EdH 1,670 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 It isn't remembering I am signed in. I logged in to post last night, closed the tab in Safari, close my macbook, and went to bed. Woke up this morning and clicked on an email link and it took me to the article, but I wasn't logged in. When I did log in - which didn't require a password by the way, just pressing login seemed to work - it took me to a generic page, not the post I was at. Link to comment
Level 5* CalS 5,280 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 Unless I'm missing it, the show last message and mark as read options are gone. These were helpful if you didn't want to cycle back and forth from an unread list to the topic, particularly for topics of no interest to you. However, on the plus side the go to next unread topic option at the bottom of a topic is nice addition, again, assuming I didn't miss them in the old version. Though it would be better to go forward and backward depending on how one likes to run through the list. Link to comment
Level 5* CalS 5,280 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 When you get to your last unread topic you can press the unread button as often as you like and you stay on that topic. Seems it should transfer to an empty list. EDIT: I take it back. The second time I did this I did get the empty list page. The first time it was a @gazumped post, maybe that was the problem. Link to comment
Level 5 jbenson2 2,147 Posted December 17, 2015 Level 5 Share Posted December 17, 2015 11 hours ago, JMichael said: The other biggie for me, is how easy the pages are to read. They are both easy to read, and look very nice. Frankly, I am not sure how much longer I will be able to participate in this new forum. It might look great for young people with eagle eyesight, but the faint green font colors make it a struggle to view. I realize that faded green is the Evernote corporate color, so I am just spitting into the wind. And because I view posts in full-screen mode, the missing horizontal line makes it difficult to move from the left side (topics) to the right side (replies). Link to comment
Historynerd 34 Posted December 17, 2015 Share Posted December 17, 2015 You're not the only one and I am a 30-something with quite good eyes. The list of topics/threads in a forum is indeed difficult to read. Not much contrast. Overall the lay-out is quite white. Also: the blocks with the page numbers (when a topic has more than one page for example) are also difficult to read. However, when you are in a topic (this one for instance), the text of the posts are good to read :). It feels more modern and clean. If there could be more contrast/less white, it would be perfect. Link to comment
gbarry 2,658 Posted December 17, 2015 Share Posted December 17, 2015 13 hours ago, JMichael said: Just now, when I selected just the above portion of EdH's post, and clicked on "Quote This", it quoted his entire post. The quote blocks for existing threads seem to have disappeared. The quote text is there, but no indication that is is a quote. See https://discussion.evernote.com/topic/90900-evernote-for-mac-63-released/?do=findComment&comment=388747 as an example. Although I generally avoid it, sometime you do need to quote the entire multi-quote block of a previous post. This doesn't seem to work now when you click on the "Quote" button at the bottom of each post. Hmmm, haven't been able to reproduce this just yet. These should now be there. The site has some background processes running to rebuild the site and that was one of them. Looks good now. This was by design to remove block pyramids, which just explode the length of threads. 14 hours ago, JMichael said: All existing threads seem to have double spacing between paragraphs. When posting the initial topic, the full formatting toolbar is not shown. Don't see the "Preview" button now Yeah, this is the difference between a double carriage return and a new paragraph We've updated the WYSIWIG, is there an improvement there? "Preview" was removed with the implementation of the WYSIWIG Link to comment
gbarry 2,658 Posted December 17, 2015 Share Posted December 17, 2015 13 hours ago, JMichael said: It is not showing all of of Private Messages https://discussion.evernote.com/messenger/ It shows I have 48 msg, but only 5 of them appear in the actual list. The Indent and Outdent buttons are missing from the formatting toolbar. The Insert Image button is missing The Reveal BBC Codes button is missing The Font Family/Name dropdown is missing The Insert Code Block button is missing All of my PMs have reappeared. Can you recheck? This was likely a background process and just wasn't completed. @g2ews can you check again as well? Seeing all of mine at this point. Will work on adding them back The insert image button is unfortunately a part of "insert other media" button at bottom right. Not optimal but that's where it's at. BB codes are gone with this implementation. But we can build emoji's galore I'll look at adding this back in. Will add this back in. Link to comment
gbarry 2,658 Posted December 17, 2015 Share Posted December 17, 2015 7 hours ago, EdH said: It isn't remembering I am signed in. I logged in to post last night, closed the tab in Safari, close my macbook, and went to bed. Woke up this morning and clicked on an email link and it took me to the article, but I wasn't logged in. When I did log in - which didn't require a password by the way, just pressing login seemed to work - it took me to a generic page, not the post I was at. Your cookie was still active b/c you didnt sign out. We had to make a change during SSO testing on the staged site that impacted relogging you back into your start page, let me look at fixing. Link to comment
g2ews 0 Posted December 17, 2015 Share Posted December 17, 2015 1 hour ago, gbarry said: All of my PMs have reappeared. Can you recheck? This was likely a background process and just wasn't completed. @g2ews can you check again as well? Seeing all of mine at this point. Hi Geoff, Checked and still not there. I see my avatar, which was there this morning has disappeared as well. Regards Chris Link to comment
g2ews 0 Posted December 17, 2015 Share Posted December 17, 2015 Trying to see how to look at or change my avatar and cannot see anything in my profile or account info that allows me to do this. Chris Link to comment
Guest CharlesW Posted December 17, 2015 Share Posted December 17, 2015 11 minutes ago, g2ews said: Trying to see how to look at or change my avatar and cannot see anything in my profile or account info that allows me to do this. Chris Just click your name in the top right and then click the edit icon on your photo. Link to comment
Level 5* Metrodon 2,184 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 It's quite annoying not being able to see how many pages in a thread and then having to go to the first page of a thread even though I want to go to the last... Link to comment
Guest CharlesW Posted December 17, 2015 Share Posted December 17, 2015 1 minute ago, Metrodon said: It's quite annoying not being able to see how many pages in a thread and then having to go to the first page of a thread even though I want to go to the last... If you click the little circle to the left it will take you to the first unread reply in the topic. It only shows if you have not read every post in a topic. Link to comment
Level 5* Metrodon 2,184 Posted December 17, 2015 Level 5* Share Posted December 17, 2015 3 minutes ago, CharlesW said: If you click the little circle to the left it will take you to the first unread reply in the topic. It only shows if you have not read every post in a topic. Weirdly, I can see page numbers in the Windows forums but not in the Mac forums. Anyone else seen the same? Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 1 hour ago, gbarry said: All of my PMs have reappeared. Can you recheck? Mine are still missing. Link to comment
gbarry 2,658 Posted December 17, 2015 Share Posted December 17, 2015 6 hours ago, jbenson2 said: Frankly, I am not sure how much longer I will be able to participate in this new forum. It might look great for young people with eagle eyesight, but the faint green font colors make it a struggle to view. I realize that faded green is the Evernote corporate color, so I am just spitting into the wind. We're taking a look at legibility across the entire site and will be reviewing all of the feedback gathered. Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 @gbarry: Two more glitches: I'm not getting email notifications on threads/forums I was subscribed to prior to the update Select All (CMD+A) does NOT work when creating/editing a post. Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 @gbarry: Mac forums are missing the very important and useful last post name/date: But it is there for the Windows forum: Link to comment
gbarry 2,658 Posted December 17, 2015 Share Posted December 17, 2015 44 minutes ago, JMichael said: I'm not getting email notifications on threads/forums I was subscribed to prior to the update Select All (CMD+A) does NOT work when creating/editing a post. Investigating. I made a settings adjustment that *may* fix notifications, but not sure, still looking into this. 32 minutes ago, JMichael said: Mac forums are missing the very important and useful last post name/date: This is actually by design. The "product feedback" forum we envision to be a space where users submit and discuss ideas, and vote up those ideas. If you look at Mac Help it should have the last post name/date, just like the Windows Help forum. The two spaces have different functions and purposes, so operate slightly differently from eachother. I'm really excited about the product feedback voting and where we can take that to provide stronger feedback on what the community values with each product. Still looking into PMs, and I'm wondering if some of the "disappeared" avatars were gravatars... Link to comment
Level 5* JMichaelTX 4,117 Posted December 17, 2015 Author Level 5* Share Posted December 17, 2015 1 minute ago, gbarry said: This is actually by design. The "product feedback" forum we envision to be a space where users submit and discuss ideas, and vote up those ideas. That fine, but I don't see the point of removing the last post name/date. There's plenty of room for it. When I scan the forum list of topics, I often want to go to the last post. Please add it back. Link to comment
Level 5* JMichaelTX 4,117 Posted December 18, 2015 Author Level 5* Share Posted December 18, 2015 This key topic seems to be missing or inaccessible: https://discussion.evernote.com/topic/67849-mac-data-location/#entry311041 It's a post showing how to find the location of your Mac data folder, and is referred to in many other "how to" posts. Link to comment
Historynerd 34 Posted December 18, 2015 Share Posted December 18, 2015 15 hours ago, gbarry said: I'm wondering if some of the "disappeared" avatars were gravatars... My avatar has disappeared and was a gravatar. (note: it isn't a huge problem for me, just wanted to confirm that mine was a gravatar). Link to comment
Level 5 jbenson2 2,147 Posted December 18, 2015 Level 5 Share Posted December 18, 2015 I am seeing quite a bit more spam with the new forum. Also, the Moderation Actions button does not appear on all the spam messages. I estimate 1/3rd of the spam messages this morning did not have the Moderation Actions feature. Link to comment
Level 5* JMichaelTX 4,117 Posted December 18, 2015 Author Level 5* Share Posted December 18, 2015 @gbarry: Glitches that continue: EMail Notifications -- I'm not receiving any for threads/forums subscribed to before or after the new forum Sign In -- is being required much more frequently than before, and when you sign in it doesn't return you to the page you were on. Missing Private Messages -- still missing Select All (menu or CMD+A) in Forum Editor -- doesn't work in some forums, like the General Discussion, but does work in the Windows forum. Std Mac Shortcuts, like CMD+UpArrow -- like Select All, it doesn't work, the cursor doesn't move, in the Editor of some forums. Link to comment
Level 5* JMichaelTX 4,117 Posted December 19, 2015 Author Level 5* Share Posted December 19, 2015 @gbarry: Major Glitch: All Links to Posts within a thread are now broken This is a major issue, IMO. I have tons of EN Notes with links to specific posts and all these links are now broken. There are many posts made prior to the update that had links to other posts. Here's an example: OLD LINK: https://discussion.evernote.com/topic/90900-evernote-for-mac-63-released/?p=388591 NEW LINK: https://discussion.evernote.com/topic/90900-evernote-for-mac-63-released/?do=findComment&comment=388591 The New Link is the link now being used for a post made prior to the update. Please restore the post links as they were prior to the update. Link to comment
Level 5* JMichaelTX 4,117 Posted December 19, 2015 Author Level 5* Share Posted December 19, 2015 On 12/17/2015 at 10:08 PM, JMichael said: The other biggie for me, is how easy the pages are to read. They are both easy to read, and look very nice. Another, big, big, THANK YOU!. @gbarry, sorry, but I now have to retract this statement. I am now finding a lot of the text to be too low contract to quickly and comfortably read. Please make the green in the links to be a darker green. I'm not sure why it initially appeared so readable. Maybe I was just having an exceptional clear eye day. But after having used the new forum for nearly a week now, like @jbenson2, I'm finding it a strain on my eyes to read for more than a minute or so. I do think you have made other changes that help the readability of the forum over the old version. Just need a few tweaks now. Screenshot: Link to comment
Level 5* JMichaelTX 4,117 Posted December 19, 2015 Author Level 5* Share Posted December 19, 2015 @gbarry: Issues with the "Sort by" Button The "Sort by" button is confusing and misleading. I never occurred to me that it also contains filters. After days of searching for the "Filter" button we had in the old forum, I finally clicked it and discovered the filters I was looking for. Please change the "Sort by" to "Filter by" or "Filter & Sort by". Also, there is a BUG in the Filter by "Last Reply of Today" Link to comment
Level 5 jbenson2 2,147 Posted December 19, 2015 Level 5 Share Posted December 19, 2015 On 12/18/2015 at 9:46 AM, jbenson2 said: I am seeing quite a bit more spam with the new forum. Also, the Moderation Actions button does not appear on all the spam messages. I estimate 1/3rd of the spam messages this morning did not have the Moderation Actions feature. I am seeing more and more spam that cannot be moderated. For instance https://discussion.evernote.com/topic/91211-sell-cvv-good-fresh-2015-icq-666564689/ Link to comment
Level 5 jbenson2 2,147 Posted December 19, 2015 Level 5 Share Posted December 19, 2015 Sometimes the moderator icon (spam button) is at the top, other times it is on the bottom, and other times I can't find it anywhere. Link to comment
Level 5* JMichaelTX 4,117 Posted December 19, 2015 Author Level 5* Share Posted December 19, 2015 6 minutes ago, jbenson2 said: Sometimes the moderator icon (spam button) is at the top, other times it is on the bottom, and other times I can't find it anywhere. That's called an "easter egg", isn't it? Link to comment
semobill 16 Posted December 19, 2015 Share Posted December 19, 2015 18 hours ago, JMichael said: @gbarry, sorry, but I now have to retract this statement. I am now finding a lot of the text to be too low contract to quickly and comfortably read. Please make the green in the links to be a darker green. These nearly 80 year old eyes can manage the pale green font. Not great but I can manage. It is not a deal killer. OTOH, the faded fonts are challenging and incredibly tiring. First year design students learn "Form follows function." If it can't be read, it doesn't matter how pretty it is. Use green in the trim but not in the text. Really like the new forum generally. I didn't understand the navigation very quickly but I am learning. Link to comment
Level 5* JMichaelTX 4,117 Posted December 20, 2015 Author Level 5* Share Posted December 20, 2015 6 hours ago, semobill said: First year design students learn "Form follows function." If it can't be read, it doesn't matter how pretty it is Exactly. Evernote should print this in large bold letters, and place on top of every designer's monitor. For a great demo of this, see Contrast Rebellion . Link to comment
Level 5* JMichaelTX 4,117 Posted December 20, 2015 Author Level 5* Share Posted December 20, 2015 @gbarry: Glitches Continue Sorry to keep harping on these two, but the combination makes it a real PITA to follow the forums: Still not receiving any email notifications Changing the "Sort by" to show only posts since my last visit doesn't stick. Every time I go back to the forum, I have to reset this. This worked great in the old forum. Link to comment
Level 5 jbenson2 2,147 Posted December 20, 2015 Level 5 Share Posted December 20, 2015 Perhaps I need to schedule a visit with my Optometrist. The faded Evernote Green is bad, but the Evernote Grey is almost impossible to read http://www.evernote.com/l/AALTUX-cbgtCjKJAMDIQc2ivfbxTzL0kso8/ Link to comment
Level 5 jbenson2 2,147 Posted December 20, 2015 Level 5 Share Posted December 20, 2015 On 12/19/2015 at 11:40 AM, JMichael said: That's called an "easter egg", isn't it? I found it. This new forum setup is screwy! There are at least 4 different spots to report spam. Seems totally random. http://www.evernote.com/l/AALnge-2o_NE0aNtePdAB-tq_0NuX0A9pa8/ Link to comment
Level 5* DTLow 5,736 Posted December 20, 2015 Level 5* Share Posted December 20, 2015 I'm seeing non-English posts, and foreign discussion forums, for example Spanish Discussions. Not sure if it was intentional. Google Translate is useful for these, but it does interrupt the flow. Link to comment
Level 5* CalS 5,280 Posted December 20, 2015 Level 5* Share Posted December 20, 2015 The one thing I can't figure out how to do easily is to start with the oldest post and work my way forward. There is a next unread topic link on some pages or an unread and 4 different other ways to go to unread, but missing the mark as read that existed in the old forum. Not that big a deal I suppose, just get used to reverse chronological. That and which of the Unreads. Link to comment
Level 5* JMichaelTX 4,117 Posted December 21, 2015 Author Level 5* Share Posted December 21, 2015 8 hours ago, csihilling said: The one thing I can't figure out how to do easily is to start with the oldest post and work my way forward Cal, have you tried this: Click on the "Sort by" button, and: Link to comment
Level 5* CalS 5,280 Posted December 21, 2015 Level 5* Share Posted December 21, 2015 If I could but find the Sort by button.... Link to comment
Level 5* JMichaelTX 4,117 Posted December 21, 2015 Author Level 5* Share Posted December 21, 2015 4 hours ago, csihilling said: If I could but find the Sort by button.... Not sure if you're kidding. But JIC: Top right side of the topic list in every forum. You can always do a browser find of "sort by" LOL Link to comment
gbarry 2,658 Posted December 21, 2015 Share Posted December 21, 2015 I’ve got a bulk update for y’all: Gravatars - are back. You may need to reactivate though--I'm not sure if the connection to Gravatar needs to be re-established or not. Don't have a test account w/ Gravatar activated. Email notifications should be working again Updates made to signatures and mod permissions, but this should only affect Gurus/member mods—check for a “check box” to the right of each thread and you should be able to see hide/move. Signing in takes you to the same page you were viewing—this is getting worked on Checking on direct post links being broken Still looking into missing PMs and avatars Design update requests are noted for review I’ve got a reported log in issue (different from that I’m looking into Follow up questions or can’t reproduce: Sign in frequency—are you actually losing the cookie mid-session, and you haven’t closed your browser, logged into another Evernote account from the same browser, or turning off the computer? Not able to reproduce the CMD-A problem on any part of the forum Not able to reproduce the CMD-Up-arrow (page up, page down) and appears to be working in editor All design suggestions are noted for me to go over in bulk. We have new spam controls that actually work with Invision’s anti-spam system. These features either take a while to work themselves into efficacy, or they are not working. I’m hopping on regularly, filtering for all activity, and then clearing out spammish. Old schoolers will note we’ve had a some spam problems before, and I don’t want to ever go back again The big one was email notifications, in my humble opinion. All my testing shows that’s working, but let me know if they’ve been engaged at this point and you're starting to see them come through. Pushed some changes a few hours ago. Link to comment
Level 5* CalS 5,280 Posted December 21, 2015 Level 5* Share Posted December 21, 2015 2 hours ago, JMichael said: Not sure if you're kidding. But JIC: Top right side of the topic list in every forum. You can always do a browser find of "sort by" LOL Ah, that's where it is. Unfortunately I go through unread for the forums I follow in bulk, not by forum, so I didn't see the option. No sort option on the blened screen that I can see. Oh well, Thanks anyway. EDIT: Found it. When you select a stream, there is an edit this stream option, click on that and there is a sort drop down for oldest or newest first. Link to comment
Level 5* JMichaelTX 4,117 Posted December 21, 2015 Author Level 5* Share Posted December 21, 2015 1 hour ago, gbarry said: I’ve got a bulk update for y’all: Thanks for all the fixes. Email notifies are starting to come in now. 1 hour ago, gbarry said: Not able to reproduce the CMD-A problem on any part of the forum Not able to reproduce the CMD-Up-arrow (page up, page down) and appears to be working in editor Just tested this again in the Mac Help forum:https://discussion.evernote.com/topic/91282-how-to-remove-annotation-summary/ I did a quote of the last msg, and typed a few lines, then tried both a CMD-A and CMD-UP while in the EDITOR block. Neither worked, literally, nothing happened, no movement of the cursor at all. Inside of an edit block, CMD-A should select all of the edit area ONLY, not the whole page. CMD-UP CMD-DWN should go to the top and bottom of the edit area, respectively. OK, now the CMD-A is NOT selecting all of the edit window in this post. Previously it seems to work in this forum, but not now!?!?! Don't have any idea why, or what's changed. Even a manual click and drag to select everytging isn't working properly. I using Chrome Version 47.0.2526.106 (64-bit) on Yosemite (10.10.5). 1 hour ago, gbarry said: Sign in frequency—are you actually losing the cookie mid-session, and you haven’t closed your browser, logged into another Evernote account from the same browser, or turning off the computer? For me this happens after I have closed all discussion.evernote.com windows/tabs (but left Chrome running), and not come back for an hour or more. Link to comment
Level 5* EdH 1,670 Posted December 22, 2015 Level 5* Share Posted December 22, 2015 Is any work being done to remember that i am logged in, or when you log in to take you back to the discussion you were in? This is how it works for me right now: click link in email. wait for mandrillapp.com to redirect me to the EN discussion forums. (I do not like this by the way. I don't know why our usage needs to be tracked by the company that owns MailChimp.) See I am not logged in. Log in get redirected to the forum front page. close the tab. go back to my email click the link wait for mandrillapp.com to redirect me to the EN discussion forum. Not fun. Link to comment
Level 5* CalS 5,280 Posted December 22, 2015 Level 5* Share Posted December 22, 2015 Ditto what @EdH just said. Link to comment
Level 5* CalS 5,280 Posted December 22, 2015 Level 5* Share Posted December 22, 2015 @gbarry, Email to post to login still does not return to the post. Also, changing the sort on the general unread stream does not seem to stick for me. By design or am I fat fingering something? Other than that, getting used to it. Would like a next thread in my stream option, only in forum as far as I can tell. Link to comment
Level 5* JMichaelTX 4,117 Posted December 23, 2015 Author Level 5* Share Posted December 23, 2015 12 hours ago, EdH said: Log in get redirected to the forum front page. close the tab. go back to my email click the link wait for mandrillapp.com to redirect me to the EN discussion forum. @EdH: I agree this is a real PITA that needs to get fixed ASAP. Until then, you can just hit the browser back button after you log in to take you back to the original page. Link to comment
Level 5* EdH 1,670 Posted December 23, 2015 Level 5* Share Posted December 23, 2015 11 hours ago, JMichaelTX said: @EdH: I agree this is a real PITA that needs to get fixed ASAP. Until then, you can just hit the browser back button after you log in to take you back to the original page. Ahh. that does work. That did not work originally. I kept going back to the original message, but it showed me as not signed in. So still not ideal, but a bit better. Link to comment
Level 5* EdH 1,670 Posted December 23, 2015 Level 5* Share Posted December 23, 2015 well, something is really messed up now. Sometimes I am getting forced quoting when I just hit "reply" , and I am getting a server 500 error when I press submit, and then it gets double posted. Link to comment
Level 5* JMichaelTX 4,117 Posted December 26, 2015 Author Level 5* Share Posted December 26, 2015 @gbarry: I tried using "quote this", but it didn't work. It kept showing a blank quote block by EdH. Quote Sign in frequency—are you actually losing the cookie mid-session, and you haven’t closed your browser, logged into another Evernote account from the same browser, or turning off the computer? This is still a significant issue. It is requiring me to "sign in" after about an hour of inactivity, even though the browser is still top to this forum. Link to comment
Level 5* DTLow 5,736 Posted December 26, 2015 Level 5* Share Posted December 26, 2015 Import restrictions seem harsh. Im getting the message There was a problem processing the uploaded file. You can only upload a total of 0MB This was both on replying to posts, and I wanted to update my picture (currently resembles someone in the Witness Protection Program) Link to comment
gbarry 2,658 Posted January 6, 2016 Share Posted January 6, 2016 Happy new year y'all. Some new forum updates--we're working on returning you to the referral link at log in. That's priority one after taking care of some SSO issues which were resolved yesterday. SSO fix was implemented yesterday to fix issues with community registration Some of you were receiving notifications for new posts in our community announcements forum that were not actually community announcements. That's been fixed with a permissions adjustment. The hook that was forcing some double/triple posting late into the holidays has been fixed--that was an overly aggressive spam hook that I'm (still) testing to try to permanently fix some of the spam issues we've seen with transition. Fixed junk activity feeds in "My Activity Streams" New FURLS breaking old direct to single post links (not to the whole thread) should be fixed @DTLow: shot you a belated email via support ticket for this--you should be able to update your picture via updating your profile, rather than your "about me" section. In some areas of the profile we limit images, like your signature. Unfortunately the error message the forum presents here reflects the setting and not something more helpful. While some forums like for people to stuff banners in their sigs, I'm of the opinion I would rather read the content than repeated sig images I'll continue to update this thread as we tackle adjustments to the forum. Link to comment
Level 5* EdH 1,670 Posted January 15, 2016 Level 5* Share Posted January 15, 2016 Is anything being done where when we click on a link in an email notification, it will remember who we are, and if we have to log in, after logging in we actually get taken to the link we clicked on? Link to comment
Level 5* JMichaelTX 4,117 Posted January 21, 2016 Author Level 5* Share Posted January 21, 2016 @gbarry, how's it going with the forum fix list? Haven't seen much activity or changes in the last couple of weeks. I show the following issues still have not been fixed: Click on email notification link does NOT go to post after login Sign in frequency is too high, required after less than 1 hr of inactivity Product Feedback forums are still missing last post name/date Links to posts prior to update don't work "Select All" while creating/editing a post does not always work Std Mac Shortcuts, like CMD+UpArrow -- like Select All, it doesn't work, the cursor doesn't move, in the Editor of some forums. Issues with the "Sort by" Button remain. Changing the "Sort by" to show only posts since my last visit doesn't stick. Moderators can no longer change topic title or add tags. Readability is still an issue. Just making the light green text a dark green would be a huge help. Need a General Discussion section/feature where requests common to multiple platforms can be voted on. All pre-existing threads seem to have double spacing between paragraphs. The PM list of existing msg is still not nearly as useful/friendly as prior to forum upgrade. Product Feedback forums don't offer a way to go to last page/last post of the topic/idea from the topic list page Inconsistent display of topic paging Product Feedback forums show paging AFTER the OP Help forums show it at the top, ABOVE the OP Please make all show at the TOP, ABOVE the OP The Product Feedback forums repeat the OP on every page. This is not needed, and wastes valuable space and time to always scroll down others? To: All Members If I missed a forum issue you have identified that still has not been fixed, please post below. Link to comment
Level 5* JMichaelTX 4,117 Posted January 21, 2016 Author Level 5* Share Posted January 21, 2016 @gbarry: Request: Redesign Forum Pages to Remove Excessive White Space at Top of Every page The current design uses about 2/3 of a large screen (height: 1152) before the real content is shown. I believe the page could easily be redesigned to clearly show the information at the top without so much white space. At the most, a max of 1/3 of the page should be used by this. The goal should be 1/4 or less. Example screenshot: Link to comment
Level 5* JMichaelTX 4,117 Posted January 21, 2016 Author Level 5* Share Posted January 21, 2016 25 minutes ago, JMichaelTX said: @gbarry: Request: Redesign Forum Pages to Remove Excessive White Space at Top of Every page It is much, much worse when viewed on a laptop, like a MacBook Air 13-in, with a 1440x900 screen: Link to comment
gbarry 2,658 Posted January 22, 2016 Share Posted January 22, 2016 Thanks for compiling these--it looks like I have them all documented, and our priorities *roughly* match up. #1 will be addressed in a two step process--we have a service release next week that will update the SSO so our vendor can make the necessary changes to the SSO to make sure the redirect at login works. At that time I'm also looking to address #2 in a bulk review of the SSO with our vendor--I agree the sign in frequency is too high, especially since the cookie is retained. Is #4 not resolved with our fix to FURLs? Can you toss me a thread where a discussion forum link is broken? Link to comment
Level 5* JMichaelTX 4,117 Posted January 22, 2016 Author Level 5* Share Posted January 22, 2016 1 hour ago, gbarry said: Thanks for compiling these--it looks like I have them all documented, and our priorities *roughly* match up. You're welcome. Thanks for confirming list. 1 hour ago, gbarry said: s #4 not resolved with our fix to FURLs? Can you toss me a thread where a discussion forum link is broken? Nope, not resolved. Here's a link from page 2 of this thread: On 12/18/2015 at 3:08 AM, JMichaelTX said: This key topic seems to be missing or inaccessible: https://discussion.evernote.com/topic/67849-mac-data-location/#entry311041 It's a post showing how to find the location of your Mac data folder, and is referred to in many other "how to" posts. Link to comment
Historynerd 34 Posted January 23, 2016 Share Posted January 23, 2016 I want to add another issue: - I'm reading a topic (doesn't matter which one, it happens with every topic), not logged in. I decide to make a reply, so I sign in. Normally, you should be taken back to the topic after that, but that doesn't happen. Link to comment
Level 5* tavor 668 Posted January 26, 2016 Level 5* Share Posted January 26, 2016 On 12/21/2015 at 4:21 PM, gbarry said: Follow up questions or can’t reproduce: Sign in frequency—are you actually losing the cookie mid-session, and you haven’t closed your browser, logged into another Evernote account from the same browser, or turning off the computer? If I browse the forum, as I am doing now, and leave the browser open, if I come back in a few hours, I'll be logged out. This is despite an initial login with authentication code and ticking the box to keep me logged in for 30 days. So, browser open, logged into only one EN account, and computer on (does sleep count? Its a laptop). Edit: Even without the laptop going to sleep, I'll get automatically logged out of the EN forum. Link to comment
gbarry 2,658 Posted February 3, 2016 Share Posted February 3, 2016 On 1/21/2016 at 2:59 PM, JMichaelTX said: Click on email notification link does NOT go to post after login Sign in frequency is too high, required after less than 1 hr of inactivity Took a little longer than expected, but we've successfully taken care of #1 and made changes to fix the aggressiveness of #2. I haven't had enough time to really see if the changes to the SSO improve #2 (relates directly to your report @tavor ) but please do let me know if you all see an improvement. I'm going to take a look at the rest of the list and see what can be tackled, but I'm happy we've resolved the log in referral issue. Should make email notifications pain free. On a slightly fun note, our forum supports custom emojis which are super quick to implement. Should definitely have the EN logo in there. I'm wondering what else? Link to comment
Level 5* CalS 5,280 Posted February 3, 2016 Level 5* Share Posted February 3, 2016 Just tried #1 using the email for this post. It returned me to the topic (page 1), but not the post. This the intended behavior? EDIT: On a single page topic it took me to the post. EDIT of the EDIT: Tried again and it seems all log-ins go to the first post of the topic. (I was probably already logged in and didn't realize it the first time) Link to comment
gbarry 2,658 Posted February 3, 2016 Share Posted February 3, 2016 3 minutes ago, csihilling said: Just tried #1 using the email for this post. It returned me to the topic (page 1) but not the post. That the intended behavior? Good question. Let me check if this is a limitation or something we can adjust. Link to comment
gbarry 2,658 Posted February 3, 2016 Share Posted February 3, 2016 Ok, issue is identified. I'll put this in the queue. Link to comment
Level 5* JMichaelTX 4,117 Posted February 3, 2016 Author Level 5* Share Posted February 3, 2016 3 hours ago, csihilling said: Just tried #1 using the email for this post. It returned me to the topic (page 1), but not the post. I see the same behavior using Chrome 48.0.2564.97 (64-bit) on Mac Yosemite (10.10.5). Link to comment
Level 5* Metrodon 2,184 Posted February 3, 2016 Level 5* Share Posted February 3, 2016 Still having to log in at every visit....yawn...can't believe this is something that is difficult to fix... Link to comment
gbarry 2,658 Posted February 5, 2016 Share Posted February 5, 2016 We've updated the SSO again on the vendor side--they believe they located the major issue with sign outs. Let me know if you keep getting dropped. Link to comment
Level 5* tavor 668 Posted February 7, 2016 Level 5* Share Posted February 7, 2016 On 2/5/2016 at 11:17 AM, gbarry said: We've updated the SSO again on the vendor side--they believe they located the major issue with sign outs. Let me know if you keep getting dropped. Still getting logged out as of today. Link to comment
Level 5* Metrodon 2,184 Posted February 7, 2016 Level 5* Share Posted February 7, 2016 Me too..... Link to comment
Level 5* JMichaelTX 4,117 Posted February 7, 2016 Author Level 5* Share Posted February 7, 2016 On 2/3/2016 at 0:54 PM, csihilling said: Just tried #1 using the email for this post. It returned me to the topic (page 1), but not the post. I'm still seeing the same behavior. On 2/5/2016 at 10:17 AM, gbarry said: We've updated the SSO again on the vendor side--they believe they located the major issue with sign outs. Let me know if you keep getting dropped. Although it is less frequent now, It still requires a sign in much more frequently than before the forum update. Seems like if we check the "keep me logged in" box, we should be able to go at least a week before needed to log in again. Link to comment
Level 5* tavor 668 Posted February 12, 2016 Level 5* Share Posted February 12, 2016 Something seems to have changed in the last 16-24 hours. After gbarry's post of 2/5, I was getting logged out every hour or two - i.e., it got worse. But in the last 16-24 hours, I haven't been logged out. Hopefully this is now resolved. Link to comment
gbarry 2,658 Posted February 12, 2016 Share Posted February 12, 2016 We tried a few more things and it looks like it was successful, at least thus far. I wasn't going to talk about it until I could really confirm this time. Link to comment
Level 5* JMichaelTX 4,117 Posted February 17, 2016 Author Level 5* Share Posted February 17, 2016 Delays Due to Relay Through mandrillapp.com From EMail Notifications @gbarry: I often get a delay of 10-15 seconds, and most recently, of 40 seconds, waiting for the mandrillapp.com site to relay on to discussion.evernote.com. What is the purpose of going through this site? Can you change it to direct link to discussion.evernote.com? Link to comment
Level 5* EdH 1,670 Posted February 17, 2016 Level 5* Share Posted February 17, 2016 1 minute ago, JMichaelTX said: Delays Due to Relay Through mandrillapp.com From EMail Notifications @gbarry: I often get a delay of 10-15 seconds, and most recently, of 40 seconds, waiting for the mandrillapp.com site to relay on to discussion.evernote.com. What is the purpose of going through this site? Can you change it to direct link to discussion.evernote.com? This. 1,000 times this. I do NOT like my browsing history for the EN forums going through some third party data collection company, and it just slows the entire process down. I brought this up very early in the discussion on the new forums. Link to comment
Giulio1902 0 Posted April 6, 2016 Share Posted April 6, 2016 Hello,I am new to this app, I always used to Google keep when I use Android, I wanted to know how I can synchronize Google Keep notes on everinote? thanks a lot:) Link to comment
Level 5* EdH 1,670 Posted April 7, 2016 Level 5* Share Posted April 7, 2016 On 4/6/2016 at 11:14 AM, Giulio1902 said: Hello,I am new to this app, I always used to Google keep when I use Android, I wanted to know how I can synchronize Google Keep notes on everinote? thanks a lot:) You cannot. Evernote syncs with Evernote, Google Keep with Google Keep. You could try exporting your Google Keep notes and importing them into Evernote, essentially moving services. See https://www.quora.com/How-do-I-transfer-all-the-notes-from-Google-Keep-to-Evernote for some ideas. AFAIK, there is no way to do this with just pushing a few buttons. It will be a fairly tedious process, especially if you have a lot of notes. Link to comment
Level 5* EdH 1,670 Posted April 17, 2016 Level 5* Share Posted April 17, 2016 The search isn't working well. I have a number of posts I've put the keyword ehunresolved in and search never pulls them. Is it because they are in beta forums? Can this be fixed? Search is kinda useless if it cannot even find a single word. Link to comment
Level 5 jbenson2 2,147 Posted April 18, 2016 Level 5 Share Posted April 18, 2016 4 hours ago, EdH said: The search isn't working well. I have a number of posts I've put the keyword ehunresolved in and search never pulls them. Is it because they are in beta forums? Can this be fixed? Search is kinda useless if it cannot even find a single word. When I search for ehunresolved, the search engine finds only this one post. I agree with your hunch. The others are probably hidden because they are in beta forums (which have some specific restrictions). My keyword for the multi-year discussion on the "Due Date" field was 47ER92. That keyword still works for many of my posts in the public forums. Link to comment
Level 5* EdH 1,670 Posted April 18, 2016 Level 5* Share Posted April 18, 2016 43 minutes ago, jbenson2 said: When I search for ehunresolved, the search engine finds only this one post. I agree with your hunch. The others are probably hidden because they are in beta forums (which have some specific restrictions). My keyword for the multi-year discussion on the "Due Date" field was 47ER92. That keyword still works for many of my posts in the public forums. Thanks for confirming. The search then is kind of useless if it cannot search through all posts I have access to. Link to comment
Level 5 jbenson2 2,147 Posted April 18, 2016 Level 5 Share Posted April 18, 2016 Perhaps someone else has a suggestion on searching beta comments. My guess is Evernote has a few reasons to keep beta searchability turned off from all users. 1.) The non-disclosure agreement for beta testers 2.) Confusion caused when beta functions are altered or removed, and the original comments are still in the beta forum. Link to comment
dbvirago 497 Posted April 19, 2016 Share Posted April 19, 2016 Some forums show last posted and when and some don't. Link to comment
TomsWallpapers 1 Posted April 21, 2016 Share Posted April 21, 2016 I like it pretty much as it is Link to comment
Level 5* EdH 1,670 Posted April 21, 2016 Level 5* Share Posted April 21, 2016 On 4/18/2016 at 6:45 AM, jbenson2 said: Perhaps someone else has a suggestion on searching beta comments. My guess is Evernote has a few reasons to keep beta searchability turned off from all users. 1.) The non-disclosure agreement for beta testers 2.) Confusion caused when beta functions are altered or removed, and the original comments are still in the beta forum. I get that, but when I search, I should have search results for what I have access to. It looks like they are just blocking off entire sections from search results. Not good. Makes the beta forums very hard to use as you cannot look for an old issue, or even an issue from yesterday that has scrolled off the current page. Link to comment
Vaxman2 0 Posted May 9, 2016 Share Posted May 9, 2016 On 1/20/2016 at 2:59 PM, JMichaelTX said: @gbarry, how's it going with the forum fix list? Haven't seen much activity or changes in the last couple of weeks. I show the following issues still have not been fixed: Click on email notification link does NOT go to post after login Sign in frequency is too high, required after less than 1 hr of inactivity Product Feedback forums are still missing last post name/date Links to posts prior to update don't work "Select All" while creating/editing a post does not always work Std Mac Shortcuts, like CMD+UpArrow -- like Select All, it doesn't work, the cursor doesn't move, in the Editor of some forums. Issues with the "Sort by" Button remain. Changing the "Sort by" to show only posts since my last visit doesn't stick. Moderators can no longer change topic title or add tags. Readability is still an issue. Just making the light green text a dark green would be a huge help. Need a General Discussion section/feature where requests common to multiple platforms can be voted on. All pre-existing threads seem to have double spacing between paragraphs. The PM list of existing msg is still not nearly as useful/friendly as prior to forum upgrade. Product Feedback forums don't offer a way to go to last page/last post of the topic/idea from the topic list page Inconsistent display of topic paging Product Feedback forums show paging AFTER the OP Help forums show it at the top, ABOVE the OP Please make all show at the TOP, ABOVE the OP The Product Feedback forums repeat the OP on every page. This is not needed, and wastes valuable space and time to always scroll down others? To: All Members If I missed a forum issue you have identified that still has not been fixed, please post below. #10 is correct - This forum has been the hardest to read forum I've ever encountered due to the color scheme that was chosen. Link to comment
bheeshma 0 Posted May 10, 2016 Share Posted May 10, 2016 I have Geography as my Major. I need a feature to search different locations on google maps and store/star them, and i can write a note corresponding to that location. Right now i see Evernote can add only the existing location. Is there any feature available to, search any place on my google map and add notes to that location and save that.? Link to comment
macneilpi 34 Posted May 24, 2016 Share Posted May 24, 2016 On December 16, 2015 at 11:18 PM, gbarry said: Adding this to the list to review tomorrow. Will look into all of them. And thanks for the kind words! We worked pretty dang hard on this. Still lots to do, but it's good to have it out the door. This doesn't seem to work on mobile devices, where I use Evernote 60% of my time, but check the forums 90% of the time. Am I wrong? Link to comment
Level 5* DTLow 5,736 Posted May 24, 2016 Level 5* Share Posted May 24, 2016 28 minutes ago, macneilpi said: This doesn't seem to work on mobile devices, where I use Evernote 60% of my time, but check the forums 90% of the time. Am I wrong? I access the forum using my iPad. There are some issues, but it does work. Link to comment
Level 5* JMichaelTX 4,117 Posted June 5, 2016 Author Level 5* Share Posted June 5, 2016 On 12/17/2015 at 9:05 AM, jbenson2 said: Frankly, I am not sure how much longer I will be able to participate in this new forum. It might look great for young people with eagle eyesight, but the faint green font colors make it a struggle to view. I realize that faded green is the Evernote corporate color, so I am just spitting into the wind. @gbarry: This issue with readability due to low contrast text was reported to you early on, back on Dec 17, 2015. Yet nothing has changed. I don't know if it is my eyes, or if the forum config has made things worse, but it is now very hard for me to read many of the discussion.evernote.com forum pages, especially those that list forum topics. Could you please fix this? All it would take is to make the green color you use everywhere darker. For example, here is the color now:New Forum Feedback Here is text contrast, with a darker green, that is MUCH easier to read:New Forum Feedback Is it really more important to you, and the Evernote executives, to have a specific color of green, which makes text very hard to read, than to have a darker color of green that is easy to read? Link to comment
Level 5* gazumped 11,652 Posted June 21, 2016 Level 5* Share Posted June 21, 2016 Hmmn. @gbarry The missing email issue means we can't support forum posters very closely - just came across a thread where I asked a question and the OP responded pretty quickly. A week or two later I found it again and carried on the conversation, but without an email to say there had been a post in the forum I followed, I have no way to know there's been a response unless someone quotes my post or uses my @name like I just did to you. Not hurting me, but it's not a good experience for OP's in trouble... Link to comment
aleixruiz 0 Posted June 21, 2016 Share Posted June 21, 2016 just new here, and looks awesome, probably one of the best i have seen on the web Link to comment
Level 5* CalS 5,280 Posted June 26, 2016 Level 5* Share Posted June 26, 2016 If one uses the ignore user feature there are options that appear for posts by any ignored users. However, the Show this post option does not work when selected. Link to comment
Level 5* chirmer 567 Posted June 30, 2016 Level 5* Share Posted June 30, 2016 On 6/5/2016 at 1:10 AM, JMichaelTX said: @gbarry: This issue with readability due to low contrast text was reported to you early on, back on Dec 17, 2015. Yet nothing has changed. I don't know if it is my eyes, or if the forum config has made things worse, but it is now very hard for me to read many of the discussion.evernote.com forum pages, especially those that list forum topics. Could you please fix this? All it would take is to make the green color you use everywhere darker. For example, here is the color now:New Forum Feedback Here is text contrast, with a darker green, that is MUCH easier to read:New Forum Feedback Is it really more important to you, and the Evernote executives, to have a specific color of green, which makes text very hard to read, than to have a darker color of green that is easy to read? The problem with this is that it's almost impossible to differentiate that dark green from regular black. I don't think that would be a positive step forward... ...however, perhaps a recent design trend could be used. setting all links to have a border-bottom: 2px solid #2dbe60 style applied? A fat underline for URLs has become more and more popular, especially since it works for both legibility and colorblind issues. Below is what it'd potentially look like. You could even have it be grey with a green hover - either way, it's still visible while not affecting text legibility. Link to comment
Level 5* JMichaelTX 4,117 Posted June 30, 2016 Author Level 5* Share Posted June 30, 2016 27 minutes ago, chirmer said: The problem with this is that it's almost impossible to differentiate that dark green from regular black. I don't think that would be a positive step forward... ...however, perhaps a recent design trend could be used. setting all links to have a . . . fat underline for URLs I suppose there are a number of techniques to improve readability. I don't really care which one is used, as long as the result is, in fact, improved readability, improved text contrast. Here is an example using a darker green, but not as dark as above, for forum links: Seems easy enough here to differentiate the darker green from black. I would prefer all links to have an underline. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.