RapidFinancialSolutions 18 Posted January 2, 2018 Share Posted January 2, 2018 Hi all, Happy New Year! So I'm not happy right now. All was fine with the Windows desktop version UNTIL I upgraded. Now: When I go to copy text, it's like the issue I had on the web version where you have to copy the word/text twice b/c it doesn't take the first time. Now I have to do it like 3 times. The software also hung & wouldn't load properly, so I restarted it & it looks like one of the entries on my computer no longer exists. Well I certainly didn't delete it. I finally got it running again <sigh> When I click on a line where there's text & start typing, it doesn't even know my cursor was there & I go flying all over the place. I have to click into the note several times to make sure Evernote knows I'm really there. REALLY NOT HAPPY. I was soo thrilled when I figured out that the windows version was way better than the web version & now these issues are the same issues I had on the web version & even MORE!! Thanks for listening. Link to comment
gawkla 12 Posted January 12, 2018 Share Posted January 12, 2018 hello. I see the same issues. I have opened Ticket for this: Ticket# 2328844 - Latest Windows client - problem with cursor position But no resolution till now. Probably I will try install previous version. Link to comment
RapidFinancialSolutions 18 Posted January 12, 2018 Author Share Posted January 12, 2018 My bad, they got back to me on the 2nd & I never saw the tweet. I just responded to them. Did you go back to the previous version? What OS are you using? Link to comment
katiemarie 0 Posted January 18, 2018 Share Posted January 18, 2018 I am also experiencing the cursor focus issues in Evernote. Repro path: 1) Open a new note (ctrl+N) 2) Verify that the cursor is blinking 3) Attempt to type result: blinking cursor disappears and none of my typing goes into the note. Note: I'm using the same environment as the OP. Link to comment
Ex Employees Jay-Bob 127 Posted January 25, 2018 Ex Employees Share Posted January 25, 2018 @katiemarie and @RapidFinancialSolutions Thank you for these steps concerning cursor focus issues. I haven't been able to reproduce this. When you encounter this again could you please provide a screen recording of the issue? This will help me in testing to try and replicate exactly what you're encountering. Link to comment
Chickaloon 1 Posted February 18, 2018 Share Posted February 18, 2018 This is still an issue. On the Windows client, bring up a new note. You must wait 5+ seconds, and click multiple times in the note area before you start typing, just to make SURE you're actually typing where you think you are. Not good. Link to comment
RapidFinancialSolutions 18 Posted February 19, 2018 Author Share Posted February 19, 2018 22 hours ago, Chickaloon said: This is still an issue. On the Windows client, bring up a new note. You must wait 5+ seconds, and click multiple times in the note area before you start typing, just to make SURE you're actually typing where you think you are. Not good. Are you talking about the desktop version? If yes, I just happened to check to see if there was an update (I don't know why it doesn't tell us there's an update when it's open & you are working on it) & there was. I think that issue is fixed now. I had e-mailed with them for a few days trying to give them videos of what was happening , but kept forgetting to or I already clicked in several times & so then a video wouldn't have proved anything. I just got home, so I still have to use the new version to see if it's completely working. Let us know once you upgrade. Link to comment
Chickaloon 1 Posted February 19, 2018 Share Posted February 19, 2018 Thanks, yes I just checked and yes there is a new version. I will install and try it out. I also have seen the problem where my shortcuts don't bring up any matches unless I try 5+ times. I think all these problems have a root cause around all the threading and subprocesses they are using. There are probably race conditions or other issues in the inter-process communication that is causing all this. I think they chose a much too complicated programming model for their Windows desktop version, unfortunately. Link to comment
gawkla 12 Posted February 22, 2018 Share Posted February 22, 2018 Hi Team. I've just checked last available version (6.9.7). It's better, but issue is still present. 1) Open existing note to edit 2) place cursor where you want to edit 3) start typing... -> nothing happened. Cursor is gone. Link to comment
RapidFinancialSolutions 18 Posted February 23, 2018 Author Share Posted February 23, 2018 18 hours ago, gawkla said: Hi Team. I've just checked last available version (6.9.7). It's better, but issue is still present. 1) Open existing note to edit 2) place cursor where you want to edit 3) start typing... -> nothing happened. Cursor is gone. I agree, although so far I'm, only noticing it on new notes. The highlighting & copying seems to be fixed (I hope). It used to remove the highlight when I clicked on the Ctrl button. Thanks for updating the thread. I hope they read this. Link to comment
Level 5 Dave-in-Decatur 3,950 Posted February 23, 2018 Level 5 Share Posted February 23, 2018 Check out this post in another thread. I wonder if it explains why things are continuously going hinky. Link to comment
gawkla 12 Posted February 23, 2018 Share Posted February 23, 2018 Quote Yes. We upgraded from CEFv1 to CEFv3. It was painful - the programming model is completely different. (it's also why you see moreEvernote processes in task manager) Yes. without any communication and any without final tests. Great idea. Link to comment
Level 5* jefito 5,589 Posted February 24, 2018 Level 5* Share Posted February 24, 2018 22 hours ago, gawkla said: Yes. without any communication and any without final tests. Great idea. They don't necessarily need to communicate updating internal 3rd-party components -- the normal user doesn't care about that, particularly as it may not involve anything that's user-detectable. But it's a different story when a piece of functionality that some users depend on is removed as a consequence (even if it's temporary). That's the sort of information that should be communicated in the release notes. Link to comment
gawkla 12 Posted February 24, 2018 Share Posted February 24, 2018 True, They don't need to communicate every change. But this is good practice to communicate such "big" changes. Especially when some functionality is broken. Link to comment
Daniel The Maniel 0 Posted May 19, 2018 Share Posted May 19, 2018 I'm still getting this exact problem. The first time I try to type or try to copy, the cursor goes away. My version: 6.11.2.7027 (307027) Public (CE Build ce-43.0.4829) I love evernote but this really is a pain... Link to comment
RapidFinancialSolutions 18 Posted May 21, 2018 Author Share Posted May 21, 2018 Yeh I also upgraded to version 6.11.2.7027 & thought it would fix these issues, but it HASN'T & their response to me was to go all the way back to the version where it was working & DL that. BUT, I happen to live the new feature where it shows you ALL the notes where that kw is even if it's not the notebook you are in. Why should I have to lose that feature to go back to such an old version just to get the bloody software to work :( Why can't they just fix it? Did you guys submit a ticket by first contacting them on Twitter? Because if I'm the only one complaining, they aren't going to fix it. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.